nStat
- 멀티채널 Potentiostat 입니다.
- 8개 슬롯에 자유롭게 채널 선택이 가능합니다.
- 배터리, 연료전지, 생명공학, 바이오센서등 다양한 전기화학 실험이 가능합니다.
- 임피던스 기본 내장입니다. (10μHz ~ 250kHz / 1MHz 확장가능)
- sModule (1ch 타입) : ±2.5A / ±5A / ±10A / ± 2A
- sModule (BiStat 타입) : ±2.5A / ±5A (사양은 1ch 형과 동일)
- dModule (더블채널 타입) : ±500mA / ±2.5A
Standard channel
- Channel Performance : Standard sModule (2.5A/10V)
- 4 Electrodes : WE, CE, RE and S
- Current compliance : ±2.5 A
- Maximum output Voltage : ±10 V
- Potentiostat Bandwidth : >500 kHz
- Stability settings : High Speed, Standard, and High Stability
- Programmable response filter : 1 MHz , 100 kHz , 10 kHz , 1 kHz , 10 Hz
- Signal acquisition : dual channel 16 bit ADC, 100.000 samples/sec
Potentiostat
- Applied potential range : ±10 V, with 0.33 mV resolution
- Applied potential accuracy : 0.2%, or 2 mV
- Current ranges : ±10 nA to ±10 A in 10 steps
- Measured current resolution : 0.015% of current range, minimum 1.5 pA
- Measured current accuracy : 0.2%
Galvanostat
- Applied current resolution : 0.033% of applied current range
- Applied current accuracy : 0.2%
- Potential ranges : ±10mV, ±100mV, ±1V, ±10V
- Measured potential resolution : 0.003% of potential range, minimum 400nV
- Measured potential accuracy : 0.2%, or 2mV
Impedance Analyser
- Frequency range : 10µHz to 250kHz (optional: 10µHz to 1MHz)
- Amplitude : 0.015mV to 1.0V, or 0.03% to 100% of current range
- DC offset : 16 bit dc offset subtraction, and 2 dc-decoupling filters
Electrometer
- Input impedance : >1000 Gohm //<8pF
- Input bias current : <10 pA
- Bandwidth : >5 MHz
